Skip to content

Outdoor sports flooring

Outdoor sports flooring: our professional selection

Range overview — Sales units vary by product: m², tile, roll or piece. Accessories and maintenance equipment are priced separately. Compare flooring prices for the same surface area.

Outdoor sports flooring is the surfacing specified for outdoor fitness areas, fitness trails, street workout zones and collective sports spaces exposed to weather all year. The range covers professional coverings that resist UV and frost, absorb impact and suit projects run by local authorities, campsites, schools, clubs and companies. Specification follows two figures: the free height of fall to be absorbed, and the drainage capacity of the sub base.

What defines our sports flooring

Thicknesses and formatsFrom 6 to 60 mm, up to 100 mm for extreme use. Formats 50 × 50, 50 × 100 and 100 × 100 cm, plus mats and rolls
Density900 to 1,000 kg/m³ depending on the reference, stated on every product page
CompositionRecycled rubber granules with polyurethane binder; coloured, wood-effect or patterned versions depending on the range
Impact attenuationFor a play area, check the specific product test report, critical fall height and installation conditions. A fitness tile is not automatically validated to EN 1177
Fire classificationBfl-s1, Cfl-s1 or Dfl-s1 depending on the reference. Distinguish a classification covered by a test report from a Light In Fitness declaration for finishes or thicknesses outside its scope. Verify product, thickness, subfloor, installation and field of application; documents on request, not published online
AcousticsA reduction in dB requires a report for the complete tile, underlay, subfloor and installation system. Generic values are not a guaranteed performance of each reference; verify evidence before specification
InstallationLoose-laid, connector-jointed or bonded depending on thickness and use. Substrate, flatness and drainage to be checked before ordering
Edge detailingFinishing profiles for 20, 25 and 40 mm thicknesses, plus a sloped transition strip. Access ramps and made-to-measure edging available as an option, quoted with the layout
Available on requestCellular tiles to be filled with gravel or topsoil, made-to-measure edging and ramps, interlocking rubber pavers for stables and technical rooms
Choosing the thicknessBy use zone — free weights, cardio, functional training, play area — never by overall floor area

Showing all 31 resultsSorted by latest

Choosing the covering from the use

Thickness is determined by the fall height to absorb, not by perceived comfort. A street workout zone with raised apparatus demands more than a walking route or an outdoor cardio area. Rubber density conditions durability over time as much as the stated thickness does, which is why two coverings quoted at the same millimetre figure can behave very differently after three winters.

Zone Typical requirement Comment
Walking route and access paths Thin covering or stabilised surface No fall height to absorb, wear resistance only
Outdoor cardio and ground level stations Moderate thickness Comfort and slip resistance in wet weather
Street workout and calisthenics Thick impact absorbing covering Check the equipment fall height and the selected surfacing performance
Declared play area Impact attenuation assessed to EN 1177 Matched to the critical fall height
Multi sports court Sports specific covering Ball behaviour and grip take priority

Weather resistance and drainage

A covering designed for indoor use degrades quickly under permanent exposure. Outdoor formulations include UV and frost resistance, and this is not an option that can be added later. The drainage of the sub base conditions the life of the whole assembly and has to be designed in from the start: standing water, slopes and outlets must be assessed for the chosen system. On sloping ground, the falls and the drainage outlets are part of the flooring specification, not of a separate trade.

Loose laid or bonded

On a flat, stable sub base, loose laying is sufficient in most cases and keeps the covering removable. Bonding becomes necessary in the presence of rolling loads, large temperature variation, or on a sloping surface. Perimeter edging is used to hold the covering and to protect the exposed edges.

Standards, warranty and delivery

Where the surface serves outdoor fitness equipment, EN 16630 sets the safety and protection zone requirements for the equipment above. In declared play areas, impact attenuation is assessed under EN 1177 against the critical fall height. Technical sheets and standard references are supplied with each reference so a tender file can be assembled directly. Standard delivery covers France, Belgium, Switzerland and Luxembourg, export is priced per project, and stocked references ship in 5 to 10 working days.

Frequently asked questions

What thickness is needed under a street workout rig?

Thickness is selected by matching the free height of fall specified for the equipment with the documented performance of the chosen covering. That figure is stated by the equipment manufacturer and is matched against the impact attenuation performance of the covering. Choosing the covering before the rig is the wrong order of operations.

Can outdoor flooring be laid on grass or soil?

The required preparation depends on the selected system, ground bearing capacity and drainage. Provide photographs and details of the ground so that the sub base can be specified before ordering.

How long does an outdoor rubber surface last?

Service life depends on the chosen reference, exposure, sub base, drainage, use and maintenance. Follow the inspection and maintenance instructions for the installed system. Ask for the technical sheet and the recommended sub base build up before ordering.

Send us the area, the equipment planned above it and the state of the ground, and we will return a surfacing specification with quantities and prices. Request a quotation for a reply within 24 working hours.

TOP
My quotation request 0