Components and spare parts for rope play structures
Components and spare parts for rope play structures: our professional selection
Components and spare parts let an operator extend a rope play structure or replace a worn element without changing the whole item. Seven references cover vertical and horizontal tunnels, climbing ropes, rope ladders and dense floor walkways. For a site manager, this is the economical reflex: a single tunnel or ladder is a fraction of the cost of a new structure, and it keeps the playground open.
The framework behind our playgrounds and trails
| Standards applied | EN 1176:2015 for playground equipment, EN 16630:2015 for permanently installed outdoor fitness, EN 1177 for impact-attenuating surfacing |
|---|---|
| Certification | Ranges tested and certified by an independent body, TÜV Rheinland on the TRAINER ranges — certificate supplied on request |
| Data published per reference | Age range, free fall height, safety zone, foundation depth and overall dimensions |
| Materials | Hot-dip galvanised and powder-coated steel, stainless steel, HPL and HDPE panels, laminated timber, braided polyamide ropes |
| Impact-attenuating surfacing | Sized from the equipment free fall height, never from its product family |
| Structural warranty | 20 years on steel structures, lifetime on stainless structures manufactured by Light In Fitness |
| Spare parts | Available for at least 20 years after delivery |
| Statutory inspections | Downloadable inspection log, compliant with French decree 96-1136 for public play areas |
| Design and manufacturing | Structures designed in Tours, France and manufactured in Europe — priced quotation within 72 hours |
Showing all 7 resultsSorted by latest
Extending an existing structure
Rope structures are modular by design, so a component can often be added to an installation that is already in service. The limit is compatibility: connector type, rope diameter and the anchorage of the existing frame all have to match. Send photographs of the structure and the connection points with your enquiry and we confirm compatibility before issuing a quotation.
Replacing a worn element
Ropes, tunnels and walkways are the parts that see wear in free public access, and they are also the parts flagged during periodic inspection. Replacing them keeps the installation within EN 1176 without a capital project. Any change to heights or to the accessible high point should be checked against the EN 1177 surfacing already in place before the part is fitted.
| Component | Typical reason for ordering |
|---|---|
| Vertical tunnel | Adding a climbing route to an existing tower |
| Horizontal tunnel | Linking two modules at the same level |
| Climbing rope | Replacement after inspection, or added access point |
| Rope ladder | Alternative entry to a platform |
| Dense floor walkway | Crossing between modules with a solid deck |
Frequently asked questions
Will a component fit equipment bought elsewhere?
Not automatically. We check the connectors, rope diameter and anchorage against photographs before confirming.
Does adding a component change the surfacing requirement?
It can, if it raises the accessible height. The EN 1177 surface in place should be checked against the new free height of fall.
Are these parts available for older installations?
Availability depends on the structure. Send the reference or photographs and we confirm what can be supplied.