Skip to content

Bodytone Cross Over cable stations

Bodytone Cross Over cable stations: our professional selection

Range overview — 9 models, including 9 with displayed prices: €3,095–€40,508 excl. VAT per machine; brands: Bodytone (calculated on 2026-10-19).

Bodytone Cross Over stations are cable machines for professional strength floors, covering cable crossover work, adjustable pulley columns and multi station configurations. They are specified for busy gym floors where cable work has to serve several users at once without creating a bottleneck. Light In Fitness advises operators on the configuration to choose according to the available area and the flow of members.

Showing all 10 resultsSorted by latest

Configurations and how to choose

The deciding factor is not the number of pulleys but the floor area the station occupies once the working arcs of the cables are added. A single tower serves one user in a corner; a full crossover needs a clear span between the two columns and a working zone in the middle. Adjustable columns let one station cover high, mid and low pulley movements, which reduces the number of separate machines a floor needs.

Configuration Space requirement Simultaneous users Best fit
Single adjustable column Compact, wall friendly 1 Small clubs, hotels, functional corners
Dual adjustable pulley Moderate span 1 to 2 Standard commercial floors
Full cable crossover Wide clear span plus centre zone 2 to 3 High attendance gym floors
Multi station cable unit Largest footprint 3 or more Large clubs, circuit layouts

Installation and maintenance

Cable machines are the stations with the highest consumable content on a strength floor: cables, pulleys and bearings all wear. Plan an inspection routine and keep the cable references on file so a replacement does not take a station out of service for weeks. Under the working area, rubber gym flooring tiles protect the slab and reduce noise. Indoor equipment falls under EN ISO 20957-1 class S (successor to the former EN 957), and warranty runs from 2 to 5 years depending on the range.

Frequently asked questions

How much clearance does a cable crossover need?

Allow the frame width plus room on both sides for the user’s arms to travel through the full arc, and keep the centre zone free so two people can work at once without contact. Catalogue footprints give the frame only, so the usable figure comes from the layout drawing.

Are the cables a consumable item?

Yes. Cables and pulleys wear with use and should be inspected on a set schedule, with replacement planned rather than reactive. That recurring cost is the main practical difference between a cable line and a plate loaded one, and it is worth including in the operating budget from the start.

Tell us your floor area and expected attendance, and we will propose the cable configuration that fits. Request a quotation for a reply within 24 working hours.

TOP
My quotation request 0