Full galvanised steel fitness trail equipment, range B
Full galvanised steel fitness trail equipment, range B: our professional selection
Repères de gamme — 13 modèles, dont 13 à prix affiché : 800 €–11 000 € HT par appareil ; 13 modèles conçus à Tours et fabriqués en Europe (calcul du 29/09/2026).
Range B is a full hot dip galvanised steel fitness trail range for open air sports areas that have to last without shelter. Thirteen units are listed, specified by municipalities, local authorities, campsites, military bases, schools, rehabilitation centres and leisure sites where outdoor exercise, wellbeing and health prevention are the objectives.
The framework behind our playgrounds and trails
| Standards applied | EN 1176:2015 for playground equipment, EN 16630:2015 for permanently installed outdoor fitness, EN 1177 for impact-attenuating surfacing |
|---|---|
| Certification | Ranges tested and certified by an independent body, TÜV Rheinland on the TRAINER ranges — certificate supplied on request |
| Data published per reference | Age range, free fall height, safety zone, foundation depth and overall dimensions |
| Materials | Hot-dip galvanised and powder-coated steel, stainless steel, HPL and HDPE panels, laminated timber, braided polyamide ropes |
| Impact-attenuating surfacing | Sized from the equipment free fall height, never from its product family |
| Structural warranty | 20 years on steel structures, lifetime on stainless structures manufactured by Light In Fitness |
| Spare parts | Available for at least 20 years after delivery |
| Statutory inspections | Downloadable inspection log, compliant with French decree 96-1136 for public play areas |
| Design and manufacturing | Structures designed in Tours, France and manufactured in Europe — priced quotation within 72 hours |
Showing all 13 resultsSorted by latest
Full galvanised construction
The description matters. Hot dip galvanising covers the whole section, inside and outside the tube, because the part is immersed in the bath rather than sprayed. A cut edge or a scratch does not become a corrosion starting point, which is the failure mode on painted only frames. On a site with no maintenance budget beyond periodic inspection, that is what determines whether the installation still looks acceptable after ten winters.
Free access use and installation
Loading is by body weight and there is no adjustment for the user to make, so the equipment works without supervision. Permanently installed outdoor fitness equipment in free public access falls under EN 16630. Foundations are sized to ground conditions, the layout plan with safety zones is prepared with the quotation, and installation is carried out in France. Warranty runs from 2 to 5 years depending on the range.
| Point | Detail |
|---|---|
| Material | Full hot dip galvanised steel |
| Corrosion protection | Inside and outside the section |
| Loading | Body weight, no user adjustment |
| Range size | 13 units |
| Standard | EN 16630 |
Frequently asked questions
Does galvanised steel need repainting?
No. The protection is in the coating applied by immersion; maintenance is limited to periodic inspection of fixings and moving parts.
Is the range suitable for coastal sites?
Galvanising performs well in most environments. Where exposure to sea air or de-icing salt is severe, 316L stainless steel equipment is the alternative to consider.
How many units make a fitness trail?
It depends on the route and expected attendance. The layout study proposes a mix that covers the main movements without duplication.