Description
In brief — Extreme Rubber Tile 100 mm: dimensions 50 × 50 × 10 cm, weight 18 kg, thickness 100 mm, material Rubber, use indoor and outdoor, fire rating Efl, critical fall height HIC 3 m, standards EN 1177, price 34.50 € excl. VAT.
The 100 mm Extreme rubber tile is the thickest individual tile format on the French market: a 50 x 50 cm, 10 cm thick block of PU-bound SBR granules, certified EN 1177 for a 3 m critical fall height and dimensioned for drops above 200 kg. Price: 34.50 EUR excluding VAT per tile (138 EUR per m2), minimum order 80 tiles (20 m2).
Three problems standard thicknesses cannot solve
The 100 mm exists for the situations where even 40 or 60 mm floors give up. First, extreme load drops: strongman implements and competition powerlifting bars above 200 kg, whose impact energy punches through standard tiles into the slab. Second, high play structures: with an EN 1177 critical fall height of 3 metres, the tile covers playground equipment that ordinary safety tiles cannot. Third, permanent outdoor installation in freeze-thaw climates, where its porous structure survives cycles that crack denser slabs.
Engineered for outdoor permanence
The tile combines high-density recycled SBR granules with a polyurethane binder, a certified R10 slip rating (DIN 51130) that stays reliable in wet conditions, an anti-fade UV treatment, and a cellular underside that drains water instead of trapping it. At 18 kg per 0.25 m2 tile, it loose-lays with complete stability — no adhesive needed — and cleans with a water jet, broom or vacuum. Five colours are available: black, red, green, grey and sand.
Ordering logic
The compact 50 x 50 cm format keeps each 10 cm thick tile at a handleable 18 kg. The reference ships from 80 tiles (20 m2), which corresponds to the typical minimum zone — a strongman drop area or the safety surface under one climbing structure.
Specifications
| Reference | LIF-36932 |
|---|---|
| Dimensions | 50 x 50 cm, 100 mm thick (0.25 m2 per tile) |
| Weight | 18 kg per tile |
| Material | High-density recycled SBR granules with polyurethane binder |
| Finish | Slip-resistant R10 (DIN 51130), UV-treated — black, red, green, grey or sand |
| Standard | EN 1177 — critical fall height (HIC) 3 m; fire class Efl |
| Installation | Loose-lay, cellular draining underside, indoor and outdoor |
| Minimum order | 80 tiles (20 m2) |
| Price | 34.50 EUR excluding VAT per tile (138 EUR per m2) |
Frequently asked questions
When is 100 mm actually necessary?
When drops exceed 200 kg, when play equipment reaches 3 m of fall height, or when the installation lives outdoors through freeze-thaw winters. Below those thresholds, 40 or 60 mm tiles do the job for far less per square metre.
Does it need to be glued down?
No. Eighteen kilograms per quarter square metre keeps the floor immobile under training and play; the draining underside evacuates rainwater on outdoor sites.
Can colours be combined?
Yes — the five colours share identical dimensions, so zones and markings can be built into the floor plan. We compose the layout with you at quote stage.
Discuss your drop zone or play area with our team: see our outdoor sports flooring or request a free quote.
This model within its range
- Footprint: 0.25 m², for a range from 0.25 to 1.00 m².
- Weight: 18.0 kg, for a range from 18.0 to 25.0 kg.
It is the most compact of its range and the lightest of its range. Comparison based on 7 comparable references.
Larger model: Green rubber tile 25 mm, 100 x 100 cm for outdoor sports areas
Floor care
Vacuum regularly, then wash with warm water and a pH-neutral detergent. Solvents, acetone and chlorine attack the binder and mark the surface permanently. In click-in installations, check the joints and edge clips once a year.
Fiche produit originale rédigée et publiée par Light In Fitness (Tours), mise à jour le 16/10/2026 — source : https://lightinfitness.com/en/product/extreme-rubber-tile-100mm/. Textes et photos protégés ; reproduction sans autorisation interdite.



























