Description
In brief — Rubber Tile 50 x 50 x 3 cm: dimensions 50 × 50 × 3 cm, thickness 30 mm, material rubber, price 14.00 € excl. VAT.
The grey rubber tile, 50 x 50 cm and 3 cm thick, is the architectural neutral of the coloured tile range, at 14 EUR excluding VAT per tile. Its sober tone suits contemporary terraces, rooftop decks and commercial outdoor spaces where black reads too industrial and bright colours too playful — with the full technical specification of the range behind it: 100% recycled rubber, EN 1177-compliant impact protection, anti-slip and permeable.
The understated choice for designed spaces
Grey pairs naturally with concrete, metal, glass and modern timber cladding, which makes this tile the default for projects where the floor should support the architecture rather than compete with it:
- Terraces and rooftops — a modern, low-key finish; permeable structure dries fast and resists moss and algae
- Contemporary playgrounds — impact-attenuating surfacing that fits residential and office-campus landscaping
- Fitness and CrossFit zones — 3 cm of shock and vibration absorption with sound damping, in a tone that matches modern gym interiors
- Pedestrian and utility areas — walkways, industrial floor protection, kennels and animal spaces
Laid dry, replaced tile by tile
The pin-and-hole connection assembles the tiles without adhesive on a flat, clean base; a half-brick offset bond is recommended for a homogeneous, stable surface. Tiles cut with a utility knife at the perimeter, individual tiles swap out if ever damaged, and maintenance is limited to soap and water.
Safety and the wider range
The range is certified to EN 1177 for impact-attenuating surfacing, with thicknesses from 2.5 to 10 cm covering critical fall heights from 0.90 m to over 3.00 m — the rated height follows the thickness chosen. The same format exists in black, red, green and sand, so grey can serve as the base field with colour accents for zoning.
Technical specifications
| Reference / SKU | LIF-36915 |
|---|---|
| Dimensions | 50 x 50 cm — 3 cm thick |
| Colour | Grey — also available in black, red, green, sand |
| Material | 100% recycled rubber |
| Surface | Anti-slip, permeable, quick-drying, UV- and weather-resistant |
| Assembly | Pin-and-hole connection — half-brick bond recommended |
| Standard | EN 1177 (range certified; fall-height rating depends on thickness) |
| Warranty | 5 years (manufacturing defects, normal wear excluded) |
| Price | 14 EUR excluding VAT per tile |
Frequently asked questions
Why choose grey over black?
Both share the same specification; grey reads lighter and more architectural, shows dust less than black in bright outdoor light, and integrates with concrete and metal surroundings — a finish decision more than a technical one.
Is the tile suitable for rooftop terraces?
Yes. It is permeable and quick-drying, resists moss, algae, UV and weather, and lays dry without adhesive — well suited to rooftop and terrace installations.
How do I get a project quote?
Send your surface area, project type and any colour zoning: quantities, transport and volume pricing come back within 24 business hours.
Request a free quote, or browse the outdoor sports flooring range.
This model within its range
- Footprint: 0.25 m², for a range from 0.25 to 1.00 m².
It is the most compact of its range. Comparison based on 7 comparable references.
Larger model: Green rubber tile 25 mm, 100 x 100 cm for outdoor sports areas
Floor care
Vacuum regularly, then wash with warm water and a pH-neutral detergent. Solvents, acetone and chlorine attack the binder and mark the surface permanently. In click-in installations, check the joints and edge clips once a year.
Fiche produit originale rédigée et publiée par Light In Fitness (Tours), mise à jour le 18/10/2026 — source : https://lightinfitness.com/en/product/rubber-tile-50x50x3cm-grey/. Textes et photos protégés ; reproduction sans autorisation interdite.


















