TRAINER Steel4Fit Flat Bench Chest Press D20 - Outdoor Station
2,154.00 € excl. VAT
Outdoor bench press station in the reinforced Steel4Fit build: welded S355 and S235 steel, hot-dip galvanised and double powder coated, with HDPE panels. Certified to EN 16630:2015 by TUV Rheinland.
- Works the pectorals, deltoids and triceps using body-weight resistance
- Difficulty rating: difficult
- 1,750 x 720 x 2,020 mm, 45 kg plus 50 kg pylon, safety area 475 x 372 cm
- 2,154 EUR excluding VAT
Priced quotation within 24 business hours. No commitment. Our commitments
Description
The TRAINER Steel4Fit Flat Bench Chest Press is an outdoor pressing station measuring 1,750 x 720 x 2,020 mm and weighing 45 kg plus a 50 kg mounting pylon. Rated difficult, it is certified to EN 16630:2015 by TUV Rheinland and priced at 2,154 EUR excluding VAT.
A demanding station in a reinforced build
The station reproduces the bench press using body weight as resistance, loading the pectorals, deltoids and triceps through a full pressing range. It is classified difficult, which is unusual for outdoor equipment and deliberate: circuits calibrated only for beginners lose their regular adult users within a season. This is the station that keeps trained users coming back to a public site.
Because it is a Steel4Fit build, it goes into locations where that traffic is precisely the problem – city-centre parks, coastal promenades, sites with a vandalism history.
Steel4Fit construction
- Seamless S355 curved sections and S235 straight sections, high-quality welded
- Hot-dip galvanised, then powder coated twice
- HDPE seat and bench panels
- Red and graphite finish, RAL 3000 / RAL 7016
- Mounted on its pylon, anchored into concrete foundations
Technical specifications
| Reference / SKU | D20-STEEL4FIT |
|---|---|
| Dimensions (L x W x H) | 1,750 x 720 x 2,020 mm |
| Weight | 45 kg, plus 50 kg pylon |
| Weight stack | None, body-weight resistance |
| Maximum user weight | 150 kg |
| Minimum user height | Over 140 cm |
| Safety area | 475 x 372 cm |
| Frame | Welded S355 and S235 steel, hot-dip galvanised |
| Finish | Double powder coat, RAL 3000 / RAL 7016; HDPE panels |
| Standard | EN 16630:2015, tested and certified by TUV Rheinland |
| Difficulty | Difficult |
| Price | 2,154 EUR excluding VAT |
Where it is installed
Urban parks and municipal fitness areas under intensive use. EN 16630:2015 is the European standard for permanently installed outdoor fitness equipment and is normally the reference required in public tenders. Allow the full 475 x 372 cm safety area, clear of paths and planting and surfaced to the free height of fall.
See the full Steel4Fit outdoor strength range to build a circuit that also serves beginners and older users.
Frequently asked questions
Is this station suitable for a general public circuit?
Only as part of a mixed circuit. Rated difficult, it will exclude casual users on its own. Specify it alongside easier upper-body stations so the area works across the full range of abilities.
Why are the station and pylon weights separate?
The station weighs 45 kg and the pylon a further 50 kg. Both figures are needed for the foundation calculation, which is supplied with the order.
What does the Steel4Fit build change?
Seamless S355 curved sections, hot-dip galvanising and a double powder coat rather than a single coating pass. It is the specification for sites where a standard finish would need refurbishing too soon.
Light In Fitness designs and supplies outdoor fitness areas for local authorities, campsites, hotels and property developers. Send us your site plan and we will quote equipment, surfacing and installation together.
Additional information
| Weight | 45 kg |
|---|
Reviews
There are no reviews yet.