TRAINER Steel4Fit Pec Fly - Outdoor Chest Station D06R+SZ

The TRAINER Papillon Steel4Fit (reference D06R+SZ-STEEL4FIT) is an outdoor pec fly station built for public fitness areas that take heavy, unsupervised use. It stands 2,020 mm high, weighs 80 kg, accepts users from 140 cm tall up to a maximum user weight of 150 kg, and is certified to EN 16630:2015 by TUV Rheinland. Professional price: 2,430 EUR excluding VAT.

Movement and muscles worked

The user sits on the fixed seat, grips the two vertical arms at chest height and closes them in front of the sternum against their own body weight. The movement loads the pectoralis major and the anterior deltoid, while the serratus anterior and the scapular stabilisers hold the trunk in position. Resistance comes from body mass and lever geometry rather than a weight stack, so the same station serves mixed-ability groups without any setting to change. Difficulty is rated medium.

Installed alongside the reverse fly version (D07R+SZ), it balances pushing and pulling work within the same outdoor circuit.

Steel4Fit reinforced construction

Steel4Fit is the heavy-duty build of the TRAINER outdoor range. Curved members are formed from seamless S355 steel, straight members from S235. The welded assembly is hot-dip galvanised and then powder coated twice, so the corrosion barrier keeps working after the impacts and abrasion typical of an unsupervised municipal site. The range carries its signature red and graphite finish, RAL 3000/7016.

• Seamless S355 curved sections and S235 straight sections, fully welded
• Hot-dip galvanised steel frame, double powder coated
• Signature red and graphite finish, RAL 3000/7016
• No weight stack, no cables and no adjustment pins to service
• Ground-anchored on concrete foundations
• Recommended safety area 393 x 405 cm

Technical specifications

Typical installations

Urban parks, municipal outdoor gyms, school and sports grounds, campsites and residential developments. EN 16630:2015 covers permanently installed outdoor fitness equipment, which is the standard specifiers ask for on open-access sites. Keep the 393 x 405 cm safety area clear of benches, paths and planting, and finish it with a surface suited to the free height of fall.

The station is part of the Steel4Fit outdoor strength range, which shares the same anchoring pattern and colour scheme across every unit.

Frequently asked questions

Does this pec fly need any adjustment before use?

No. There is no weight stack, no seat pin and no cable to set. Users control load through seat position, range of movement and tempo, which is what makes the station workable for open-access sites with no supervising staff.

What foundations are required?

The unit is anchored into concrete foundations sized for a 80 kg machine carrying users up to 150 kg. Foundation drawings are supplied with the order so groundworks can be prepared before delivery.

How does Steel4Fit differ from the standard TRAINER outdoor build?

Steel4Fit uses seamless S355 curved sections, hot-dip galvanising and a double powder coat instead of a single coating pass. It is specified where footfall, coastal exposure or vandalism make the standard build too short-lived.

Light In Fitness supplies outdoor fitness equipment to local authorities, campsites, hotels and property developers across Europe. Send us your site plan and we will return a quotation covering the equipment, safety surfacing and installation for the complete area.