TRAINER SW09B - Outdoor Wave-Form Traverse Bar, Street Workout

The TRAINER SW09B is a street workout module built around a wave-form horizontal bar, so users traverse in suspension along a changing line rather than hanging from a single straight bar. It measures 216 x 74.3 x 220 cm, weighs 60 kg and requires a safety zone of 474 x 616 cm. Certified to EN 16630:2015-06 by TUV Rheinland, it is supplied by Light In Fitness at 1,668 EUR excluding VAT.

The wave form changes the exercise

On a straight bar the hands stay level and the body hangs in one plane. On the snake profile the grip height changes as the user moves along it, so the shoulder angle, the pulling load and the trunk position all shift with every hand placement. The result is a traverse that trains coordination and grip endurance as much as raw pulling strength, and it produces a movement that people repeat because it is not the same twice.

• Suspended traverse along a wave-form bar
• Varied grip heights and shoulder angles in a single crossing
• Works arms, back, shoulders and the whole abdominal girdle
• Difficulty rated medium

Where it sits in a rig

At 220 cm high and 74.3 cm wide, the SW09B is taller and deeper than a plain bar module because the wave needs vertical room to develop. It is designed to be combined with the rest of the TRAINER street workout system: place it between two pull-up modules and the rig gains a traverse section, which is what turns a set of bars into a circuit people move through instead of queuing at.

Construction

Tubular high-grade steel, shot-blasted and hot-dip galvanised, then double coated in weather and UV-resistant polyester powder. The module is ground-anchored, which is required: a traverse applies swinging horizontal loads at the top of the frame that a free-standing base could not resist. Standard colours are yellow (RAL 1018/7004), graphite (RAL 7016/9006), orange (RAL 2000/9006) and lime (RAL 6018/9006), with other RAL references quoted on request.

Specification

Frequently asked questions

How does the SW09B differ from the straight bar with handles?

The handle bar module is a static station: the user hangs in one place and performs pull-ups and core work. The SW09B is a movement module: the user crosses it. They are complementary, and rigs that include both hold users longer than rigs built from repeated pull-up bars.

Is it suitable for a ninja or obstacle course?

Traverse elements of this type are a standard component of obstacle circuits, and the module can be integrated into one. Note that it is certified to EN 16630 as open-access outdoor fitness equipment, which is the applicable standard for a public installation.

What surfacing does the safety zone need?

With a 220 cm bar height, an impact-attenuating surface across the 474 x 616 cm zone is normally required. Bonded rubber and rubber tiles are the usual choices on urban sites; we specify and supply the surfacing with the module.

Light In Fitness designs and installs street workout, calisthenics and obstacle areas for councils, schools and residential developments. See the full street workout rigs range or the ninja warrior rigs catalogue. Send us your site plan and we return a rig configuration, a surfacing specification and a firm price.