Ziva 9ft Wall-Mounted Modular Rig ZXP-WMRG-0929-CCCC - 4 Sections

The ZXP-WMRG-0929-CCCC is the four-section configuration of the Ziva 9ft wall-mounted modular rig. It covers roughly 5.5 to 6 m of load-bearing wall, provides two squat stations with J-cups and dual-height pull-up bars on every section, and is dimensioned for three to six athletes training at the same time. Professional price: 2,635 EUR excluding VAT.

Two sections or four: the only decision that matters

The two-section and four-section Ziva 9ft rigs are the same product in different configurations. Identical 75 x 75 mm tube in 3 mm wall thickness, identical laser cutting, identical powder finish, identical modular interface. The variable is section count, and it translates directly into how many people can work without queueing.

• Two sections, around 3.05 m of wall, one J-cup station: private coaching, one to three athletes
• Four sections, around 5.5 to 6 m of wall, two J-cup stations: small group classes, three to six athletes
• The system is modular, so a two-section rig can be extended to the CCCC configuration later

Rack or cage: how to choose

A wall-mounted rig is a set of uprights and bars fixed to a structural wall. A cage is a three-dimensional frame with top crossmembers. If the programme requires suspended rings, ropes or a top frame for hanging accessories, a cage is the right answer. If it requires integrated J-cups, more usable length along a wall and dual-height pull-up bars, the four-section Ziva rig does the job on a smaller footprint and without occupying the centre of the room.

Who it is specified for

Semi-private coaching studios running sessions of three to five clients, where a two-section rig leaves athletes working on top of each other. Commercial gyms fitting out a 6 m functional wall with recognisable branded equipment rather than a free-standing cage. Physical preparation for services such as the armed forces, fire brigades and police, where sessions alternate squat and press work with weighted pull-ups: the CCCC gives two simultaneous squat stations plus four pull-up positions without occupying the hall.

Frequently asked questions

Does four sections mean four squat stations?

No. The standard configuration mixes squat sections fitted with J-cups and functional sections carrying pull-up bars, giving roughly two squat stations and two functional zones. The split can be adjusted to match your programming, so tell us the session format before ordering.

Can we start with two sections and extend later?

Yes. The Ziva 9ft system is modular. A two-section rig can be extended to the four-section CCCC configuration afterwards by adding modules to the same wall line. Ask us for the price of the extension module on its own.

What flooring should be planned underneath?

Rubber tiles of 20 to 30 mm under the pull-up positions, and 30 mm under the squat stations wherever a bar may be dropped. Allow approximately 12 to 15 square metres of covered training surface in front of the rig.

What kind of wall is needed?

A load-bearing wall of at least 6 m in usable length. Fixings transfer both vertical load and pull-out load, so plasterboard or non-structural partitions are not suitable. Send us a photograph and the wall construction and we will confirm the fixing method.

The four-section Ziva rig is quoted at 2,635 EUR excluding VAT, before delivery and installation. Send us the wall dimensions and the number of athletes per session and we will confirm the section split, the flooring and a full budget within 24 to 72 hours. Related configurations are listed under wall-mounted crossfit rigs.