Freestanding CrossFit cage Model 6, double width

Model 6 is a freestanding cross training rig 735 cm long and 415 cm deep, the only double width structure in our range. The extra depth turns a conventional single sided rail into an island rig with two working faces, so athletes train opposite each other instead of queueing on one side.

The practical effect shows up in class management. A single sided rig 195 cm deep gives three or four pull up positions and comfortably handles eight to twelve athletes. Model 6 doubles the working faces to six or eight pull up positions and absorbs fifteen to twenty athletes in the same 735 cm of length. A class of eighteen that needed two rotations on a single sided rig runs in one rotation here, which shortens the session and removes the waiting time that erodes member satisfaction. The coach positions at one side or at the end of the rig and supervises two mirrored groups, or runs two parallel workshops on the same structure.

The rig is self supporting, so it does not need a wall, and its island position keeps circulation open on all four sides. Floor area is 30.5 square metres against 14.3 square metres for the single sided version, which is the main constraint to check before ordering.

Technical specification

Choosing between single and double width

The decision is driven by class size and by available floor area, not by budget. Below twelve athletes per class, a single sided rig of the same length does the job on half the footprint and leaves room for a functional zone alongside. From fifteen athletes upward, Model 6 gives the better ratio of cost to simultaneous working position, because the additional depth adds capacity without adding length or a second structure. Where a box expects to grow, an evolutive rig that accepts extra modules over time may suit better than committing to the full 30.5 square metres immediately. Under the rig, plan a weightlifting grade rubber tile on the lifting faces and check the anchorage schedule against your slab. We supply the implantation drawing, quote within 24 working hours and ship 5 to 10 working days from stock.

Frequently asked questions

What overall height should I allow?

Frame height and the clearance needed above the top rail for muscle ups and rope work are confirmed in the layout study prepared for your room.

Does it have to be bolted down?

The structure is freestanding. Floor fixing is recommended where heavy simultaneous loading is expected, and the anchorage schedule is supplied with the drawing.

Which accessories are included?

The standard equipment list for your configuration is confirmed on the quotation, and additional attachments can be added from our accessory range.