Bodytone EVOT2 professional treadmill

The Bodytone EVOT2 is a professional treadmill with a 7 hp peak AC motor and a 200 kg maximum user weight, built for intensive use on a commercial gym floor. Speed runs from 1 to 20 km/h and incline from 0 to 15 per cent, across a 160 by 60 cm running surface. Start, stop, incline, speed, cool down and heart rate monitoring are managed from the connected DotM display. The list price is 7,799 EUR excluding VAT.

The frame is built from 150 x 70 mm steel tube, and the machine weighs 248 kg. That mass is not incidental: it is what keeps a treadmill stable under a heavy runner at 20 km/h, and it is the specification most often reduced on machines that look similar on paper.

Technical specification

Specifying a treadmill for a mixed membership

The 200 kg user limit is the figure that most distinguishes this model. A large share of commercial treadmills cap out well below that, which quietly excludes part of a membership from the cardio floor, and it is the members who would benefit most from walking programmes who are excluded. Combined with a 248 kg machine weight and a 150 x 70 mm tube frame, the EVOT2 is built to carry that loading day after day rather than to survive an occasional heavy user.

The DotM display is a straightforward operational choice rather than an entertainment console. Start, stop, incline, speed, cool down and heart rate are directly accessible, which suits sites where members are not spending an hour in front of a screen: rehabilitation settings, corporate gyms, hotels and municipal facilities. Where a large touchscreen and streaming are the priority, other models in the EVOT range carry them.

For layout, allow the 208 by 88 cm footprint plus a run off zone behind each machine, and check the floor loading before an upper floor installation. Light In Fitness is a French specialist in Bodytone equipment and quotes complete cardio floors as a single project.

Frequently asked questions

What is the maximum user weight?

200 kg, which is high for a commercial treadmill and makes the machine usable across a wide membership including walking and rehabilitation programmes.

Is the running surface large enough for tall runners?

The belt measures 160 by 60 cm, which accommodates a running stride rather than only walking. Speed to 20 km/h and incline to 15 per cent cover interval and hill programmes.

What are the installation requirements?

The machine occupies 208 x 88 cm and weighs 248 kg, so check the delivery route and the floor loading before ordering, particularly above ground floor level. Shipping runs 5 to 10 working days from stock and quotations are returned within 24 working hours.