Description
In brief — 16 mm H2 Pro Turf Track with Custom Logo: fire rating Cfl-s2, standards EN 12616:2014, EN 20105, EN 13501-1, price 72.10 € excl. VAT.
A measuring tool on the floor and your logo in every training photo. The H2 Pro with custom logo combines the central graduated strip, the split into two lanes and your logo built into the turf. It is the most complete configuration in the range for a facility that wants both a usable distance reference and a piece of branding that appears in every photo and every training video.
Two lanes, a central scale, one logo
Two athletes can work side by side, each in their own lane, while the central graduated strip gives both of them the same distance reference. The logo is integrated during manufacture, in the same way as the lines and the numbering, so it does not peel and does not create a raised edge underfoot. A vector file is required before production.
Materials and installation
Pro-quality artificial turf, 16 mm fibre height, for intensive indoor use. For intensive sled use the track is fixed with double-sided tape over the full surface or fully bonded, on a hard, flat, clean and dry floor: concrete, tiles or existing rubber tiles all work, provided the substrate is level. Maintenance is vacuuming, periodic brushing of the fibres, and washing with water and a neutral detergent; avoid solvents and high-pressure cleaners on the marked areas and on the logo.
The H2 Pro belongs to the numbered artificial turf tracks category. For the machine areas and drop zones on either side of the lane, see the rubber gym flooring tiles.
Technical specifications
| Product | Artificial turf sports track with integrated marking |
| Fibre height | 16 mm |
| Turf quality | Pro-quality artificial turf, intensive indoor use |
| Marking | Two lanes, central graduated strip, integrated custom logo |
| Sales unit | Per square metre, length and width made to measure |
| 1 m width option | plus 14.00 EUR excluding VAT per m2 |
| Fibre composition | Textured polyethylene monofilament — 16 mm fibre height, Dtex 6750 (± 10 %), density 81,000 stitches/m² (± 10 %) |
| Backing | Primary polypropylene backing and secondary latex backing, reinforced with a textile layer that locks the fibres into the polypropylene — permeability 32.5 l/min/m² (UNE EN 12616:2014) |
| Weight per m2 | 2,750 g/m² in total (± 10 %), of which 1,670 g/m² of fibre (± 10 %) |
| UV resistance | Light fastness above 3 (UNE EN 20105-A02) |
| Fire rating | Cfl-s2 (EN 13501-1) |
| Certifications | Technical data sheet and installation instructions supplied on request |
| Installation | On a hard, flat, clean and dry floor. For intensive use with loaded sleds: double-sided tape over the full surface or full bonding — loose-lay is not suitable. Joints made with turf-specific adhesive tape. |
| Maintenance | Vacuuming, periodic brushing of the fibres, water and neutral detergent |
| Roll width | 2 m — standard roll 2 × 25 m, cut to length. A special width of up to 2.82 m in a single piece can be produced, at an extra cost quoted with the offer. |
| Warranty | 5 years against manufacturing defects. Wear from use — continuous friction, repeated sled passes, applied loads — is not covered. |
| Price | 72.10 EUR excluding VAT per m2 |
Who is it for?
Boxes and studios that communicate: branding built into the floor. The lane appears in class photos, in social media clips and in competition footage. A logo built into the turf is visible from above and from the side, and it stays legible for the life of the surface.
Head-to-head formats: two lanes, one scale. Two lanes side by side allow paired sprints, relays and partner workouts, while the central graduated strip keeps both athletes on the same distance reference.
Strength and conditioning: repeatable protocols. The central scale supports fixed-distance testing over time, because the reference no longer depends on where the cones were placed for that particular session.
Franchises and multi-site operators: one visual standard. The same marking plan and the same logo can be reproduced from one site to another, which makes results comparable between locations and keeps the brand consistent.
What to know before ordering
The logo has to be supplied as a vector file. A clean vector outline reproduces without difficulty. Send us the file before the quotation is finalised so we can confirm what the process will render.
The price is per square metre, not per linear metre. A lane 15 m long and 2 m wide is 30 m2. Work out the real surface area before comparing quotations.
The marking is built in, not applied on top. Numbering, lines and logo are part of the surface: they do not wear off, but they cannot be changed after delivery. The marking plan, the distances and the position of the logo must be approved before production.
Fibre composition, backing, weight per m2 and fire rating are not published. These figures affect delivery logistics and compliance in public-access buildings. Ask for the full technical data sheet before validating a project subject to a safety commission.
The substrate is prepared before installation, not after. It must be stable, clean, dry and level enough. Existing irregularities are corrected before laying: they remain perceptible under the turf and concentrate where the sled runs. Rolling the turf out over the substrate before final fixing shows up the defects to correct.
What we do not claim. This track is designed for sled lanes, but no HYROX approval and no equivalence of behaviour with the official competition turf is claimed: no certified comparative test has been carried out. Nor do we publish a guaranteed service life for intensive commercial use, because it depends on frequency of use, loads, sled type, maintenance and installation quality.
Frequently asked questions
What file do you need for the logo?
A vector file. Fine gradients and very thin typography do not translate well onto a turf surface; send us the artwork and we will tell you what will read clearly at floor scale before anything is produced.
Does the logo wear out before the turf does?
It is integrated during manufacture rather than applied on top, so it ages at the same rate as the surface around it. Keep solvents and high-pressure cleaners away from it and brush the fibres periodically.
Which width should I choose?
One-metre-wide tracks carry a supplement of 14 EUR excluding VAT per m2. A 2 m width is what allows the two-lane layout with two athletes side by side or the passage of a wide sled.
Can the logo be repositioned later?
No. Its position is fixed at manufacture, like the numbering and the lines. Decide on the position, the scale and the reading direction before the order is launched.
Is the track delivered in one piece?
Packaging depends on the dimensions ordered: beyond a certain length the track arrives in several widths to be joined on site. Tell us your dimensions and we will confirm the packaging and how the logo is positioned across the joins.
Can we have a lane with no seam across the full width?
Standard production width is 2 m, to keep handling and transport manageable: beyond that, widths are joined on site. A special width of up to 2.82 m in a single piece can be produced, at an extra cost quoted with the offer. Tell us the lane width you are aiming for and we will confirm what is feasible on your project.
Is this track HYROX approved?
No. It is used for sled training, including HYROX preparation, but no approval and no certified equivalence with the official competition turf is claimed, as no comparative test has been carried out. We prefer to say so before the order rather than let an equivalence be assumed.
Ordering and quotation
The H2 Pro with custom logo is sold by the square metre at 72.10 EUR excluding VAT per m2. Send us your lane dimensions, the width you want, your marking plan and your vector logo, then request a free quotation: we will confirm the surface area, the rendering of the logo, the packaging and the delivery terms for your country.
Turf care
Brush against the pile once a month under intensive use to lift the fibres. Remove leaves and debris to keep drainage clear. Clean water and a soft brush are enough: no chemicals, no high-pressure washing at close range.
Fiche produit originale rédigée et publiée par Light In Fitness (Tours), mise à jour le 20/10/2026 — source : https://lightinfitness.com/en/product/turf-track-16mm-h2-pro-logo/. Textes et photos protégés ; reproduction sans autorisation interdite.








