Ninja Elite Combo 2.3.3 T-Rex compact OCR cage

The Ninja Elite Combo 2.3.3 T-Rex is a compact self supporting OCR cage on six 70 x 70 x 3 mm pillars, 600 cm long and 300 cm wide, with a base pillar height of 280 cm. It is designed to fold for fast assembly and fits into a garden or a small club without taking a large area. The price is 14,500 EUR excluding VAT with a lead time of 30 to 45 days.

Despite the small footprint, the equipment list is dense. The combo is supplied with four types of composite grip and four grip board variants, which is what allows a training session to progress from easy to hard without leaving the cage. Extension arms lengthen the structure by 60 cm on both long sides, adding hanging lines outside the pillar line.

What is included

Six pillars, a stationary hamster wheel, a salmon ladder, a 400 cm climbing rope arm, a 400 cm arm with a fireman pipe and ropes used as handles, a 300 cm spinning pipe with pins, a 300 cm suspended wooden beam, two 300 cm metal strips with ten eyelets each plus ten composite ring grips, two 300 cm perforated metal panels with ten eyelets each plus twenty composite ball grips of 70 and 80 mm, five cross posts forming a flying monkey, a horizontal ladder with pins, a curved horizontal ladder with pins and two composite rings, pillar extension arms, two 300 cm horizontal bars with seven eyelets each plus seven composite disc grips and seven composite cone grips, a 290 cm horizontal tube, a 290 cm horizontal rope, a 300 cm labyrinth board, a 300 cm board with grips and pegs carrying six climbing balls and four rails, a 300 cm square hole board with six climbing balls and four rails, a 300 cm climbing hold board with six rails and three balls, four 250 cm ropes and a 100 cm rotating bar.

Technical specification

Where a 6 by 3 metre cage fits

A footprint of 600 by 300 cm is small enough for a private garden, a school hall bay or the corner of a training room. What is not small is the 400 cm vertical requirement for the rope arm and fireman pillar, which is nearly always the deciding constraint indoors. Check that dimension to the lowest obstruction before committing.

The structure is self supporting and folds for assembly, which shortens installation and makes it realistic to move the cage if a club relocates. For regular or public use, anchoring is still the right approach given the swinging loads, and an impact attenuating surface should sit under the hanging lines sized to the fall height above.

Delivery and installation are priced individually according to the site. Composite grips, ropes and ring slings are the consumables and remain available as spare parts.

Frequently asked questions

Is it suitable for a private garden?

Yes. The compact self supporting design is explicitly intended for a garden or a small club, subject to the 400 cm clearance for the rope and fireman elements.

Can elements be changed later?

Individual elements can be replaced with others from our range, so the circuit can be reworked as the user’s level rises.

Are delivery and installation included?

No. The 14,500 EUR excluding VAT covers the equipment; transport and fitting are priced individually according to the site.