Ninja Elite Combo 4.3.3 Godzilla OCR cage

The Ninja Elite Combo 4.3.3 Godzilla is a four segment OCR and Ninja Warrior cage built on ten 70 x 70 x 3 mm steel pillars with a base height of 2.7 metres. It is the most heavily equipped cage in the Elite Combo line, assembled for competitors training for obstacle course racing formats such as Spartan Race, Runmageddon and Barbarian Race. The price is 29,000 EUR excluding VAT and the lead time is 30 to 60 days.

The frame runs 12 metres along the pillar contour and 15 metres once the hanging elements are counted, with a width of 3 metres between pillars and 4.2 metres including the extensions. Those extensions are what carry the nunchaku bars, the saucer handles and the start stop ropes, so the usable training envelope is considerably wider than the frame suggests.

Steel is powder coated over galvanising and the colour is specified from the RAL range. Boards are reinforced plywood, ropes are polypropylene and the climbing holds and balls are composite.

Obstacles by segment

Segment 1 carries a straight ladder with ring pins, a rotating hamster wheel, a salmon ladder with three step jumps on tube, a double sided steel circle rail with eyelets for hanging handles, a rail with five ring slings at 600 mm spacing, a main plate board, a side labyrinth board, three one metre horizontal pipes, 2.5 metre start and stop ropes, and a seven piece nunchaku handle bar. Segment 2 adds an arc ladder with ring pins, a vertical cheese board rail, five rings, a rotating UFO wheel rail, a side panel with climbing sills and grip holes, a horizontal rope on the extension and a seven piece saucer handle bar. Segment 3 holds three pendular horizontal ladders, the Variat spiked rotating tube, a double pipeline tube labyrinth, five rings, a climbing hold board and five two metre vertical ninja sticks with a seven piece ball handle bar. Segment 4 completes the circuit with a horizontal board with climbing sills, a dragon tail of four jumps at 500 mm spacing, two ring rails, a cone handle board, a 3.5 metre fireman pole with ropes, a pole dance pair of climbing tubes and a four metre rotating climbing rope bar.

Technical specification

Space planning and anchoring

The figure to work from is 129.6 m2 of required area, not the 63 m2 swept by the elements. Indoors that translates into a hall bay of at least 15 by 5 metres kept clear, and a ceiling that accepts the four metre rope climb and fireman pole above the 2.7 metre pillars. Many commercial units fail on the four metre dimension rather than on floor area.

Because the cage is certified to PN-EN 16630 and PN-EN ISO 20957-1, it can be installed in commercial facilities and in open urban spaces. Outdoors the galvanised and powder coated finish handles weather exposure; the anchoring is set into foundations sized to the site. Impact attenuating surfacing is required under the hanging lines, specified to the fall height of the tallest element above it.

Frequently asked questions

Can the cage be shortened or reconfigured?

The segments are modular and individual elements can be exchanged for others in the range, which lets the circuit evolve as your athletes progress. Send us the available bay and we will propose a segment count that fits.

Is the four metre pole height mandatory?

The rope climb and fireman pole are specified at four metres. Where headroom is limited, the layout is adjusted at design stage rather than after delivery, so confirm your free height before ordering.

What colour options exist?

The powder coating is supplied in any RAL reference, which allows the structure to match club branding or a municipal colour scheme.