Kore fixed cold plunge bath, 400 litres
4,166.67 € excl. VAT
Fixed cold plunge bath with a CNC machined monobloc shell of 400 litres and polyurethane insulation, measuring 170 x 80 x 66 cm. Runs with an external chiller handling cooling, filtration and disinfection.
Priced quotation within 24 business hours. No commitment. Our commitments
Description
The Kore is a fixed cold plunge bath with a CNC machined monobloc shell of 400 litres, designed to run with an external chiller. The single piece shell has no joints to leak and no panels to work loose, which is the difference between a plunge bath specified for a commercial recovery suite and a tub intended for occasional private use.
Polyurethane insulation limits heat gain, and that has a direct operating consequence: the chiller runs less often to hold temperature, which reduces both electricity consumption and wear on the compressor. On a unit used daily in a professional setting, insulation is an operating cost item rather than a comfort feature.
High flow connectors are pre installed and concealed so the exterior lines stay clean. The remote chiller handles cooling, continuous filtration and disinfection, which keeps the water usable through a working day without manual intervention. Customisable LED lighting is fitted, and the materials are UV and weather resistant so the bath can be installed indoors or outdoors.
Technical specification
| Item | Value |
|---|---|
| Product type | Fixed cold plunge bath |
| Model | Kore |
| Dimensions | 170 x 80 x 66 cm |
| Water volume | Approximately 400 litres |
| Empty weight | 75 kg |
| Filled weight | Approximately 475 kg |
| Structure | CNC machined monobloc shell, polyurethane insulation |
| Lighting | Customisable LED |
| Installation | Indoor or outdoor, UV and weather resistant materials |
| Cooling | External chiller required, not included |
| Electrical | Tub requires no supply; chiller on a dedicated 230 V circuit |
| Price | 4,166.67 EUR excluding VAT |
Specifying a cold plunge for a commercial site
Two figures govern the installation. The filled weight of approximately 475 kg is a point load that has to be checked on suspended floors and on decking, and the 230 V dedicated circuit is for the chiller alone, since the tub itself needs no electrical connection. That separation simplifies the installation considerably: the bath can sit where the design wants it and the chiller can be located where servicing is convenient.
Typical buyers are boutique hotels, design led wellness centres and individual recovery suites in professional settings, where the appearance of the installation matters as much as its performance. We recommend pairing the Kore with a Cold Pulse Pro chiller for a complete automated cycle of cooling, filtration and disinfection.
Frequently asked questions
Is the chiller included?
No. An external chiller is required and quoted separately. We recommend the Cold Pulse Pro for a fully automated cycle.
Does the bath need an electrical supply?
No. Only the external cooling unit is connected, on a dedicated 230 V circuit.
Can it be installed outdoors?
Yes. The materials are UV and weather resistant, so indoor and outdoor installation are both possible.
Request a quotation for a reply within 24 working hours, or see the fixed cold plunge baths range.
Additional information
| Dimensions | 170 × 80 × 66 cm |
|---|
Reviews
There are no reviews yet.