Bodytone Forza FR12H Dumbbell Rack - 12 Pairs, 600 kg Double Row
1,334.50 € excl. VAT
The Bodytone Forza FR12H is a double-row storage rack for twelve pairs of hexagonal dumbbells, rated to 600 kg. It centralises a full weight range on one unit while keeping the floor footprint under control.
- Capacity: 12 pairs of hexagonal dumbbells
- Maximum load 600 kg, rack weight 66 kg
- Dimensions 296 x 73 x 73 cm
- Reinforced double-row steel structure, epoxy paint finish
- ABS end caps and non-slip feet
Priced quotation within 24 business hours. No commitment. Our commitments
Description
The Bodytone Forza FR12H holds twelve pairs of hexagonal dumbbells on a double-row frame rated to 600 kg. It measures 296 x 73 x 73 cm and weighs 66 kg empty, which makes it the storage answer for a gym running a complete weight ladder rather than a partial selection.
Double-row storage and floor economy
The design decision that defines this rack is the double row. Storing twelve pairs on a single tier would need close to six metres of wall; on two tiers it takes just under three, at the same 73 cm depth. In a free-weight zone where every square metre carries a revenue cost, that halving is the point of the product. It also keeps the whole ladder within a few steps, so members do not have to cross the room to move from 10 kg to 30 kg.
- Full weight range centralised on one rack
- Tiered layout, both rows visible and reachable
- Easier re-racking, which keeps pairs matched
- Simplifies cleaning and daily floor management
Construction
The frame uses a reinforced steel structure with an epoxy paint finish, thermoplastic ABS end caps closing the sections, and non-slip feet to hold position on a rubber floor. The 600 kg rating is the cumulative figure across the rack, which is what a double-row unit has to carry: a twelve-pair ladder running from 10 kg to 32 kg comes to roughly 500 kg once loaded.
Technical specifications
| Reference / SKU | LIF-BT-FR12H |
|---|---|
| Dimensions (L x W x D) | 296 x 73 x 73 cm |
| Weight | 66 kg |
| Capacity | 12 pairs of hexagonal dumbbells |
| Maximum load | 600 kg |
| Frame | Reinforced double-row steel structure |
| Finish | Epoxy paint |
| Fittings | ABS thermoplastic end caps, non-slip feet |
| Price | 1,334.50 EUR excluding VAT |
Frequently asked questions
Does it take round dumbbells as well as hexagonal?
The FR12H is configured for hexagonal dumbbells. If your set is round, the six-pair FR06R takes both profiles and is the better match; tell us the set you own and we will confirm the right reference.
How much floor loading should be allowed?
Empty the rack weighs 66 kg; loaded it can approach 666 kg spread over a 296 x 73 cm footprint. On a suspended floor, check the slab rating and consider spreading the set across two shorter racks.
Are dumbbells supplied?
No, the rack is storage only. We can quote a matching hexagonal dumbbell ladder alongside it so that the capacity and the weight range line up from the start.
Send us the dumbbell range you are equipping, the number of racks and the delivery address, and we will return a quotation covering storage, weights if required, and delivery to the training floor.
Additional information
| Weight | 66 kg |
|---|---|
| Dimensions | 296 × 73 × 73 cm |
Reviews
There are no reviews yet.