Skip to content
Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm to Pinterest (opens in a new window)Save on Pinterest : Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm
Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm
Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm
Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm
Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm
Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm

Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm

Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm : fire rated rubber flooring tiles, marque Light In Fitness, 40,80 EUR excl. VAT. Encombrement 100 × 100 × 3 cm, masse 23 kg. Thickness : 30mm. Brand : Light In Fitness. Fire classification : Cfl-s1. Delivery and installation priced on quotation across Europe.

40.80 € excl. VAT

i.e. 48.96 € TTC selon la destination de livraison

Shipping quoted separately The shipping cost is confirmed before you approve the order.

✓ Professional equipment ✓ Advice & tailored quote ✓ Delivery across France & Europe ✓ After-sales & warranty

  • Dimensions: 100 × 100 cm (1 m² per tile)
  • Thickness: 30 mm
  • Use: strength training and free weights in buildings open to the public
  • 40.80 € excl. VAT per tile, i.e. 40.80 € excl. VAT/m², delivery not included
  • Fire rating: Cfl-s1

Quotation = itemised pricing with delivery, installation and trade discounts, within 24 business hours. No commitment. Our commitments

Conformity: classement au feu Cfl-s1 (NF EN 13501-1:2018), rapport de classement P239907, document DEC/3 du 03/04/2024, au nom de Light In Fitness, établi par le LNE (Laboratoire national de métrologie et d’essais, Laboratoire de Trappes, organisme notifié auprès de la Commission européenne sous le n° 0071). Produit classé : dalle caoutchouc SBR recyclé de 1 000 kg/m³, finition noire, non ignifugée, épaisseurs testées de 15 à 30 mm. Essais NF EN ISO 11925-2:2020 sur 12 éprouvettes, conformes à 15 s d’exposition, et NF EN ISO 9239-1:2013 : éclairement critique de 7,2 kW/m² en 30 mm et 5,2 kW/m² en 15 mm, pour un seuil Cfl fixé à 4,5 kW/m² ; production de fumées de 429 %·min en 30 mm et 730 %·min en 15 mm, pour un seuil s1 fixé à 750 %·min. Classement valable en pose libre, en pose collée ou adhésivée, et sur substrat classé A1 ou A2-s1,d0 d’une masse volumique d’au moins 1 350 kg/m³. Un rapport de classement ne constitue ni une approbation ni une certification de type produit. Light In Fitness détient le rapport et le transmet au client après commande ; il n’est pas diffusé publiquement afin de prévenir son utilisation frauduleuse.

Warranty: 5 ans contre les défauts de fabrication, hors usure normale — details of our warranties.

SKU: LIF-932830 Categories: , Tag:

Description

In brief — Studded rubber tile Cfl-s1 30 mm: dimensions 100 × 100 × 3 cm, weight 23 kg, thickness 30 mm, density 1 000 kg/m³, fire rating Cfl-s1, standards EN 13501-1:2018, EN ISO 9239-1, EN ISO 11925-2, price 40.80 € excl. VAT.

Studded rubber tile Cfl-s1 30 mm – product and ordering

SBR rubber floor tile with a studded underside, format 100 × 100 cm (1 m² per tile), thickness 30 mm, black, fire-rated Cfl-s1. European manufacture. Price: 40.80 € excl. VAT per tile, i.e. 40.80 € excl. VAT/m², delivery not included. Volume pricing by surface area, on quotation.

The range

This Cfl-s1 tile is also available as: solid 15 mm, solid 30 mm, studded 25 mm.

Uses and limits

This tile is intended for gyms and buildings open to the public where a Cfl-s1 fire rating is required. At 30 mm, it covers strength floors and free-weight zones. The class required depends on the type and category of the building: it should be checked with the inspection body.

Technical specifications

Dimensions 100 × 100 cm (1 m² per tile)
Thickness 30 mm
Dimensional tolerance ± 1 %
Colour Black
Material SBR rubber, medium grain
Underside Studded
Density 1,000 kg/m³
Fire rating Cfl-s1
Manufacture Europe
Weight per tile 23 kg
Sound reduction 23 dB (declared value)
Sales unit 1 tile = 1 m²

What the studded underside changes

The studs leave a continuous void between the tile and the substrate. Air circulates and water drains away underneath: this tile can be laid indoors or outdoors, provided the substrate drains properly.

That air gap also separates the covering from the structural slab and reduces the transmission of impact noise to the level below — the deciding factor for a training area installed on an upper floor, above offices or flats.

Edge trims and transition ramps are available on quotation for exposed edges, in the thickness selected. A solid-colour version in 100 % EPDM (blue, grey, ochre, green or brick red) can also be produced to order, with minimum quantity and lead time confirmed on the quotation.

Working out quantities and delivery

Allow for the usable surface plus a cutting margin for edges and cut-outs around machines. Delivery is on pallets and is not included in the price: transport costs depend on quantity and destination and are stated on the quotation.

Installation

Loose lay. The tiles are laid on a flat, clean and dry subfloor, edge to edge with no gap between them. Leave an expansion gap of about 5 mm between the flooring and the walls. Start with a full row along a wall or facing the entrance, then lay in a staggered pattern, offsetting the joints from one row to the next, to spread the stresses. Subfloor preparation should be confirmed according to the condition of the existing floor and the intended use.

Care

Sweep or vacuum regularly to remove dust, sand and abrasive particles. Wash with a slightly damp mop or a scrubber-dryer fitted with soft brushes, using a pH-neutral detergent suitable for rubber flooring, then rinse with clean water if needed and leave to dry. Wipe up any spilled liquid straight away.

Do not use: wire brushes or abrasive pads, bleach, vinegar, bathroom cleaners, high-pH strippers, or products containing oils, greases or solvents. The floor is used with clean sports shoes.

Documents, warranty and after-sales

Technical data sheet supplied on request with the quotation. Warranty conditions are stated on the quotation. After-sales contact: contact@lightinfitness.com.

Frequently asked questions – Studded rubber tile Cfl-s1 30 mm

What is the price and what does it cover?
The price is 40.80 € excl. VAT per tile, i.e. 40.80 € excl. VAT/m², delivery not included. Volume pricing applies by surface area, on quotation.
Is the fire classification report provided?
Yes, on request: it is attached to the quotation. It is not published online.
Is delivery included in the price?
No. Pallet delivery is priced on the quotation according to quantity and destination.
How much does a tile weigh?
A tile weighs 23 kg, i.e. 23 kg/m². This figure is used to check the load capacity of the floor and to plan handling on delivery.

Our installations in photos

Projects completed with our tile models. Photos taken on site and in the warehouse; the facilities are not named.

Studded rubber tiles laid edge to edge on a concrete slab
Discover our black floor tiles, ideal for protection and shock absorption. Perfect for workout areas and gyms.
Black rubber tile floor in an empty room, just after installation
black rubber tile floor in an empty room, just after installation

This model within its range

  • Weight: 23.0 kg, for a range from 15.0 to 23.0 kg.

It is the heaviest of its range. Comparison based on 8 comparable references.

Lighter reference: Studded rubber tile Cfl-s1 25 mm – 100 × 100 cm

Floor care

Vacuum regularly, then wash with warm water and a pH-neutral detergent. Solvents, acetone and chlorine attack the binder and mark the surface permanently. In click-in installations, check the joints and edge clips once a year.

Autres équipements de la même gamme

Additional information

Weight 23 kg
Dimensions 100 × 100 × 3 cm
Brand

Light In Fitness
Fire classification

Cfl-s1

Delivery and installation

Delivery in mainland France within 7 to 10 days for this product.

23 kg for 100 × 100 × 3 cm: these figures are used to calculate shipping, which is charged separately and stated before you confirm. Access requirements (loading dock, tail lift, door widths) and the delivery appointment are agreed before dispatch.

Laying depends on the surface; installation can be quoted or carried out by your team.

Reviews

There are no reviews yet.

Be the first to review “Studded rubber tile Cfl-s1 30 mm – 100 × 100 cm”

Your email address will not be published. Required fields are marked *

Related products

TOP
My quotation request 0