Parkour Set Start Plus 1M-P06 parkour course

The Parkour Set Start Plus 1M-P06 occupies the same 5.07 by 5.50 metre footprint as the Start model but carries additional elements, raising the secured surface to 63.91 m2. Structure height is 2.00 metres, the required safety zone is 8.41 by 8.50 metres, and certification covers EN 16899 and EN 1176. It is listed at 36,905 EUR excluding VAT.

The value of this reference is density. Adding obstacles inside an unchanged footprint gives more combinations per square metre, which is what a club needs when it runs coached sessions on a fixed plot and wants variation without buying ground. The extra 3.67 m2 of secured surface reflects the wider swept area of those additional elements rather than a bigger frame.

Practically, that means a group can be split across more stations at once, and progressions can be built from easier to harder without moving to another part of the site.

Technical specification

Intensity of use and maintenance

A denser course concentrates more users into the same area, so plan the surfacing accordingly. The 63.91 m2 must be impact attenuating and certified for a critical fall height of 2.00 metres to EN 1177. On heavily used municipal sites, EPDM wet pour tends to outlast turf on shock pad at the take off and landing points, which is where the surface fails first.

Foundations are concrete and prepared before the installation crew arrives. Access needs to allow a delivery vehicle to reach the pad; the elements are shorter than on the linear references, which usually makes a constrained urban site workable. Steel structures carry a 20 year warranty and spare parts are supplied from Tours.

Inspection follows EN 1176 once the facility opens. On a set with more elements per square metre, budget slightly more inspection time than for the base configuration, because the number of fixings and grip points to check rises even though the footprint does not.

Frequently asked questions

Is the extra cost over the Start model justified?

The difference is 1,315 EUR excluding VAT for a richer set of obstacles on identical ground and identical foundations. If your plot is already fixed at around 72 m2, the Plus gives more training value from the same civil works.

Does it need a different safety zone?

No. The required zone stays at 8.41 by 8.50 metres. Only the secured surface figure changes, from 60.24 to 63.91 m2, so surfacing quantities should be taken from the higher number.

Who can use it?

The 2.00 metre free fall height suits beginners through to confirmed practitioners, which is why the model is common in schools and municipal sports areas where the same course serves several age groups.