Sauna, steam room and shower cabin

This cabin combines a dry sauna, a steam room and a fully fitted shower inside a single hemlock and aluminium enclosure. It is delivered as a factory built unit for hotels, wellness centres, spa areas, sports clubs and premium residential projects where a complete wet and dry circuit has to fit into one footprint. Light In Fitness has supplied wellness and fitness equipment to professional operators from Tours since 2013.

The structure uses hemlock panelling on an aluminium frame, 8 mm tempered glass, an acrylic tray and a PVC floor. The dry sauna section carries a 3 kW heater, two hemlock bench sets, a thermometer, a sand timer, waterproof LED lighting, a stainless steel handle and a computerised LCD control panel. The shower section is fitted with a copper overhead rose, a 360 degree rotating copper shower head, three copper nozzles, a copper body jet set, switch panel, waterproof LED lighting, a PVC back panel, a stainless steel frame and its own LCD controller. Mains supply is 220 V and every internal lighting circuit runs on 12 V safety voltage.

Technical specification

Installation in a professional wellness area

A combined cabin is normally positioned at the end of a changing circuit so that users move from the shower to the steam room and then to the dry sauna without crossing the dry fitness floor. The unit needs a level, drained and waterproofed slab, a dedicated electrical supply and mechanical extraction sized for the room volume. Because the three functions share one shell, plant room requirements stay far lower than three separate cabins, which is the main reason hotel and residence operators specify it for compact wellness suites. Our technical team prepares the layout drawing, the service entry points and the delivery schedule before manufacture. Shipping runs 5 to 10 working days from stock, and quotations are issued within 24 working hours.

Frequently asked questions

What are the external dimensions of the cabin?

External and internal dimensions, along with door swing and service clearances, are supplied with the layout study prepared for your room. They are confirmed before the order is placed.

Can the cabin be installed indoors in an existing room?

Yes. It is designed for indoor installation on a waterproofed floor with a drain. The room needs a suitable electrical supply and extraction; both are checked during the site survey.

What warranty applies?

Wellness cabins carry a manufacturer warranty of 2 to 5 years depending on the component group, with spare parts and preventive maintenance available through our after sales department in Tours.