Description
Colour-flecked rubber roll 4 mm – product and ordering
Sports flooring roll in SBR rubber and EPDM granules, thickness 4 mm, format 10 × 1.25 m (12.5 m² per roll), black flecked with coloured granules. Fire rating Efl. Price: 154.70 € excl. VAT per roll, i.e. 12.38 € excl. VAT/m², delivery not included. Volume pricing by surface area, on quotation.
The range
The rubber roll is available in several thicknesses and finishes: 6 mm – 10 × 1.25 m colour-flecked, 8 mm – 10 × 1.25 m colour-flecked, 4 mm – 10 × 1 m black with white flecks, 6 mm – 10 × 1 m black with white flecks, 8 mm – 10 × 1 m black with white flecks, 4 mm – 10 × 1.25 m black, 6 mm – 10 × 1.25 m black, 8 mm black.
Uses and limits
A roll limits the number of joints on large surfaces. At 4 mm, it protects the subfloor in cardio areas, pin-loaded machine zones and walkways; for heavy free weights and bar drops, see tiles of 20 mm and more. The colour of the EPDM granules (blue, red, green, yellow…) is chosen when ordering.
Technical specifications
| Roll dimensions | 10 × 1.25 m |
|---|---|
| Surface | 12.5 m² |
| Thickness | 4 mm |
| Colour | Black with coloured EPDM granule flecks (blue, red, green, yellow…) |
| Material | SBR rubber and EPDM granules |
| Fire rating | Efl |
| Weight per roll | 53 kg |
| Dimensional tolerance | ± 1 % |
| Density | On request |
| Sales unit | 1 roll |
Working out quantities and delivery
Quantities are calculated from the usable surface, plus a cutting margin. Delivery is on pallets and is not included in the price: transport costs depend on quantity and destination and are stated on the quotation.
Installation
Unroll on a flat, clean and dry subfloor, then cut with a utility knife. Rolls are laid edge to edge with no gap between them, with an expansion gap of about 5 mm along the walls. Fixing with double-sided tape or adhesive is required along the full length of the roll: at every joint between rolls and in the centre. Subfloor preparation should be confirmed according to the condition of the existing floor and the intended use.
Care
Sweep or vacuum regularly to remove dust, sand and abrasive particles. Wash with a slightly damp mop or a scrubber-dryer fitted with soft brushes, using a pH-neutral detergent suitable for rubber flooring, then rinse with clean water if needed and leave to dry. Wipe up any spilled liquid straight away.
Do not use: wire brushes or abrasive pads, bleach, vinegar, bathroom cleaners, high-pH strippers, or products containing oils, greases or solvents. The floor is used with clean sports shoes.
Documents, warranty and after-sales
Technical data sheet supplied on request with the quotation. Warranty conditions are stated on the quotation. After-sales contact: contact@lightinfitness.com.




